Your basket is empty
Call us (08) 9445 2422
Onga Silentflo SF1100 Pool Pump
1.5HP




$0.00
 
General Information

- The Onga Silentflo SF1100 Pool Pump is a product of more than 40 years of innovative hydraulic engineering

- Can move more water more efficiently for lower operating cost and super-quiet operation

- By performing with less effort, there's simply less wear and tear—and that means longer life for a higher return on your pump investment


                    
Features

- Large volume strainer basket minimises the maintenance requirement by extending the time between strainer basket clean outs

- Includes 50mm barrel unions making it quick and easy to install, while allowing pump removal without flexing pipework

- Dual connections: 50mm thread or 50mm barrel unions allows piping flexibility - threaded connections allow for permanent installation - service is still possible by removing the motor and yoke from the casing

- Thermoplastic casing and hydraulic parts provides total corrosion resistance for long life and peace of mind

- The SilentFlo range of pool pumps have passed all the requirements of AS/NZS 60335.2.41:2004 for safety, and is approved for installation within the wetted zone of the pool area

- Captive bolts for easy servicing, no lost fasteners


Technical Information
Operating Conditions

- Maximum Working Pressure - 360kPa
- Water (Swimming Pool) Temperature
  Range
- 5° C to 35° C
- Maximum Working Temperature - 50° C


Motor

- Type - TEFC 2 pole
- Nominal speed - 2900 rpm
- IP rating - IP44
- Insulation class - Class F
- Thermal overload - Internal, automatic reset
- Temperature rise - Class F
- Voltage - 230-240V
- Frequency - 50Hz
- Bearing type - Deep groove ball bearing
- Bearing temp rating - 120ºC

Materials

- Pump Casing - Reinforced Polypropylene
  40% Glass Filled
- Impeller - Polyphenylene Ether
- Diffuser - Polypropylene HP TF 40%
- Yoke - Polypropylene 40% Glass Filled
- Drain plugs - Polypropylene
- Motor shaft - SS 303
- End shield - Cast Aluminium
- Strainer basket - High Impact Polystyrene
- Strainer basket O-ring - Low friction nitrile
- Strainer pot lid - Makrolon Polycarbonate
- Barrel unions - Acrylonitrile Butadiene Styrene
- Base - Copolymer Polypropylene
- Seal bellows - Nitrile
- Seal stationary face - Aluminium oxide
- Seal rotating face - Carbon
- Seal Spring - SS 316

Model Data

- Motor Power - 1020w (P1), 715w (P2)
- Supply Voltage - 230v
- Phase - 1
- Full Load Current - 4.5A
- Locked Rotor Current - 22A
- Capacitor mfd - 25
- Thermal protection cutout - 150ºC
- Insulation class - F
- Speed (2 Pole) - 2800rpm


Pump Performance



Line Drawing


Currently there are no reviews for this product.

Currently there are no questions for this product.
Quick Links
Opening Hours
 
Find Us    
             Home Page              Mon - Fri : 7:30am to 4:00pm        8 Carbon crt,      
About Us   Saturday : CLOSED   Osborne Park,
Services & Repairs   Sunday : CLOSED   WA 6017
FAQ   Ph: 08 9445 2422
Contact Us